Start with the right scope.
Epoxy flooring in Sydney should be specified around the concrete and the work happening above it. Forklifts, vehicles, chemicals, washdowns, slip resistance and cleaning requirements all affect the coating build-up.
Before choosing a system, the slab needs to be checked for moisture, weak concrete, contamination, cracks and previous coatings. Surface preparation is what gives the new floor a reliable bond.
For operating warehouses, car parks and commercial facilities, we plan zones and curing windows around access so the floor can be completed with practical downtime.
Where this work fits.
Epoxy flooring gives concrete a harder wearing, cleaner and more useful surface. The right system can support forklifts, vehicle traffic, washdowns, chemical exposure, line marking and day-to-day commercial use. It suits warehouse and industrial pockets around Wetherill Park, Smithfield, Silverwater, Alexandria, Marrickville, Botany, Brookvale and Parramatta, where downtime, safety and cleaning all matter.
How to choose the right option.
Most epoxy flooring failures start before the coating goes down. Moisture, laitance, weak concrete, oil contamination and rushed preparation can ruin a good product.
Ask for surface preparation details, moisture checks, the epoxy build-up, slip rating intent and curing windows before locking in the program.
What to send before we quote.
The fastest way to get useful advice is to send a clear brief. You do not need to diagnose the whole problem yourself, but you can help the contractor avoid guesswork.
- Send the site address and the best access point, especially for CBD, strata or industrial estates.
- Share photos of the affected area, the surrounding area, drains, cracks, thresholds, joints, stains and any previous repairs.
- Explain when the issue appears: after storms, during washdowns, after tenant use, or constantly.
- For epoxy flooring, describe forklift traffic, vehicle traffic, chemicals, washdowns, operating hours and shutdown windows.
- For waterproofing, note whether the area is internal, external, below-ground, exposed, tiled, trafficable or covered by other finishes.
- Tell us who needs documentation: builder, certifier, strata committee, facility manager, insurer or owner.
That information helps narrow the right flooring system and whether the project also needs car park epoxy flooring, warehouse epoxy flooring, commercial waterproofing around wet zones, or strata remediation documentation for a shared building.
Common questions about epoxy flooring.
How long does epoxy flooring take to install?
Small commercial areas can often be staged over a few days, while warehouses and car parks depend on size, preparation, curing and access windows.
Is epoxy flooring suitable for forklifts?
Yes, if the system is specified for the load, turning movements, substrate and cleaning method. A thin cosmetic coating is not the same as an industrial floor system.
Can epoxy be anti-slip?
Yes. Aggregates, broadcast systems and textured topcoats can improve slip resistance for ramps, wet zones and car parks.
What causes epoxy floors to peel?
Common causes include poor grinding, moisture vapour, oil contamination, weak concrete, incompatible primers and early traffic before curing.
Can you repair an old epoxy floor?
Often, yes. The floor must be inspected to see whether it needs local repairs, full grinding, moisture treatment or a complete recoat.
Do you install car park and warehouse epoxy flooring?
Yes. AUS Waterproofing & Epoxy works on car park epoxy flooring, warehouse epoxy flooring and other commercial epoxy floors across Sydney.
Ready to scope it?
Call Zac or send the job details. We will come back with a clear next step for your waterproofing or epoxy flooring project.